|
|
|||||
| Profile | Services | Test possibilities | Test Standards | Quality | Contact |
|
Ensite is the test department of NSI
bvba at Bilzen. It was founded in March 2005 to meet the need
for environmental testing on NSI products. This need arose from the
increasing demand for keyboards and pointing devices operational at
low temperatures or tropical climates (high relative humidity).
The foundation of Ensite gives NSI the opportunity to extend its
product range in accordance with the needs of its customers.
Ensite also keeps its facilities available for the realisation of
temperature and climatic testing by order of third parties.
Ensite performs in-house temperature and climatic tests. Possible tests are among others: cold tests warm tests cyclic temperature tests constant climate tests cyclic climate tests
By performing these tests, objects can be subjected to different simulated climatic conditions e.g. arctic climate, desert climate, tropical climate, etc… Test procedures according to international standards IEC, DIN and MIL (see test standards) or according to procedures provided by the customer are possible. Customers have the opportunity to carry out tests individually at the premises of Ensite or to have them carried out by Ensite.
For tests carried out by Ensite a test report can be created if asked for by the customer. This report contains following elements : - a description of the test object(s) and the test equipment - a description of the used test procedure - the pass criteria - the test results (only if the object’s property to be evaluated can be evaluated by and at the premises of Ensite test as “to pass or to fail”). - photographs of the test setup and test object(s).
Ensite guarantees discretion concerning all tests carried out and test reports.
Our climatic chamber is a Vötsch type VC 4034 with a test capacity of 330 litre. We can perform all test demanded by the customer within the range of the specifications shown below.
Specifications climatic chamber Dimensions test space: 580mm x 765mm x 750mm (BxDxH) Temperature range: -45°C to +180°C Humidity range: from 10% r.v. to 98% r.v. (to set up at temperatures between 10°C and 95°C) Maximum heating/cooling rate : 3°C / min. Maximum weight test object: 80kg
Two glove-protected openings in the test chamber door will enable manual operation of the test object during operational tests.
Tests according to following international test standards are applicable at Ensite.
Cold tests IEC 60068-2-1 Test A IEC 60721-4 DIN 40046, part 3, Test A DIN 72300-4 VG 95332, page 3 VG 95332, page 22 BS 2011, part 2, test A MIL-STD-810, Meth. 502 MIL-E-5272, part 4.2
Warm tests IEC 60068-2-2 Test B IEC 60721-4 DIN 40046, part 4, Test B DIN 72300-4 ETS 300019-2 VG 95210, Meth.108A VG 95332, page 4 VG 95332, page 23 BS 2011, part 2, test B MIL-STD-202 E, Meth.108A MIL-STD-810 D, Meth. 501 MIL-STD-883 C, Meth.1008 MIL-E-5272, part 4.1
Cyclic temperatures IEC 60068-2-14 Test Nb IEC 60721-4 DIN 40046, part14, test Nb DIN 72300-4 ETS 300019-2 BS 2011, part 2.1, test N MIL-STD-331 A, Meth.112.1
Constant climates (constant temperature and relative humidity) IEC 60068-2-56 IEC 60068-2-78 IEC 60721-4 DIN 40046, part 2 DIN 40046, part 5 DIN 50014 DIN 72300-4 ETS 300019-2 VG 95210, page 4, test 103B VG 95332, page 5 BS 2011, part 2, test Ca MIL-STD-202, Meth.103B
Cyclic climates (varying temperature and relative humidity) IEC 60068-2-30 Test Db, Var 1 en 2 IEC 60068-2-38 IEC 60068-2-4, test D IEC 60721-4 DIN 40046, part 6 DIN 40046, part 31 DIN 40046, part 101 DIN 50016 DIN 72300-4 ETS 30019-2 VG 95210, page 7, Meth.106C MIL-STD-202, Meth.106D MIL-STD-331 A, Meth.105.1 MIL-STD-750 B, Meth.1021 MIL-STD-810, Meth.507 MIL-STD-883, Meth.1004 MIL-T-5422E, part 4.4 MIL-E-5272, part 4.4
Ensite assures quality of its provided services by the presence of qualified personnel for the execution of the tests, test equipment of the best quality and regular maintenance and calibration.
|
||
